manualshive.com logo in svg

HP 345646-001 - StorageWorks NAS 2000s External Storage Server, Administration Manual

The HP 345646-001 StorageWorks NAS 2000s External Storage Server is a powerful storage solution equipped with advanced features. To help you navigate and manage its functionalities seamlessly, we provide a comprehensive Administration Manual. You can conveniently download this manual for free from our website, allowing you to maximize the potential of your storage server.

Share
Download
background image

Storage Management Overview

50

NAS 2000s Administration Guide

Disadvantages

Some disadvantages of drive mirroring are:

■

Increased expense—Since many drives must be used for fault tolerance and hard drives 
must be added in pairs.

■

Decreased storage capacity—Only 50% of the total drive capacity is usable.

RAID 5—Distributed Data Guarding

Using this method, a block of parity data (rather than redundant data) is calculated for each 
stripe from the data that is in all other blocks within that stripe. The blocks of parity data are 
distributed over every hard drive within the array, as shown in the figure below. When a hard 
drive fails, data on the failed drive can be rebuilt from the parity data and the user data on the 
remaining drives. This rebuilt data can be written to an online spare.

This configuration is useful when cost, performance, and data availability are equally 
important.

Figure 25:  RAID 5 (distributed data guarding) showing parity information (P)

Spreading the parity across all the drives allows more simultaneous read operations and higher 
performance than data guarding (RAID 4). If one drive fails, the controller uses the parity data 
and the data on the remaining drives to reconstruct data from the failed drive. RAID 5 allows 
the system to continue operating with reduced performance until the failed drive is replaced. 
However, if more than one drive fails, RAID 5 also fails and all data in the array is lost.

Distributed data guarding uses the equivalent of one drive to store parity information and 
requires an array with a minimum of three physical drives. In an array containing three 
physical drives, distributed data guarding uses 33 percent of the total logical drive storage 
capacity for fault tolerance; a 14 drive configuration uses seven percent.

Note:  

Given the reliability of a particular generation of hard drive technology, the probability of an 

array experiencing a drive failure increases with the number of drives in an array. HP recommends 

the number of drives in a RAID 5 array not exceed 14.

S1

S2

S3

S4

B1

B3

P5,6

P3,4

P1,2

P7,8

B7

B2

B5

B8

B4

B6

Summary of Contents for 345646-001 - StorageWorks NAS 2000s External Storage Server









































































































































































































Reviews:

No comments

Related manuals for 345646-001 - StorageWorks NAS 2000s External Storage Server

Watchguard AP200 Setup Manual preview
AP200
Brand: Watchguard Pages: 40
H3C MSR 20-20 Supplementary Manual preview
MSR 20-20
Brand: H3C Pages: 6
3Com OfficeConnect 3CP4144 How To Set Up preview
OfficeConnect 3CP4144
Brand: 3Com Pages: 4
3Com OfficeConnect 3CP4144 Release Note preview
OfficeConnect 3CP4144
Brand: 3Com Pages: 2
H3C MSR 20-20 User Manual preview
MSR 20-20
Brand: H3C Pages: 60
3Com NBX V3000 Analog Instruction Sheet preview
NBX V3000 Analog
Brand: 3Com Pages: 2
H3C MSR 20 Series Manual preview
MSR 20 Series
Brand: H3C Pages: 149
3Com 3C13636 Installation Manual preview
3C13636
Brand: 3Com Pages: 27
3Com OfficeConnect 3C19500 User Manual preview
OfficeConnect 3C19500
Brand: 3Com Pages: 52
Grasslin TOWERCHRON DP72 Programming Manual preview
TOWERCHRON DP72
Brand: Grasslin Pages: 2
Iomega JAZ TRAVELLER Installation Manual preview
JAZ TRAVELLER
Brand: Iomega Pages: 2
TP-Link TD-8817 Specifications preview
TD-8817
Brand: TP-Link Pages: 3
Fortinet FortiAP S311C Quick Start Manual preview
FortiAP S311C
Brand: Fortinet Pages: 20
Allied Telesis AT-9424Ts/XP AC Datasheet preview
AT-9424Ts/XP AC
Brand: Allied Telesis Pages: 3
Allied Telesis AT-8000C Declaration Of Conformity preview
AT-8000C
Brand: Allied Telesis Pages: 1
LTS LTAH103C Hardware Integration Manual preview
LTAH103C
Brand: LTS Pages: 5
IBM OpenPower 720 Technical Overview And Introduction preview
OpenPower 720
Brand: IBM Pages: 74
AirTies Air 4240 User Manual preview
Air 4240
Brand: AirTies Pages: 28

Brands by name

Popular brands

Load more brands