manualshive.com logo in svg

HP 345646-001 - StorageWorks NAS 2000s External Storage Server, Administration Manual

The HP 345646-001 StorageWorks NAS 2000s External Storage Server is a powerful storage solution equipped with advanced features. To help you navigate and manage its functionalities seamlessly, we provide a comprehensive Administration Manual. You can conveniently download this manual for free from our website, allowing you to maximize the potential of your storage server.

Share
Download
background image

Folder, Printer, and Share Management

143

NAS 2000s Administration Guide

Note:  

While the “All Windows” support may be selected at this step, it is more efficient to add the 

alternative operating systems on each printer after the wizards are complete. See section below on 

“Adding Additional Operating System Support”.

6. Click Next on the Summary page and an Add Printer Wizard will start.

7. Select Local Printer and uncheck “automatically detect install my plug and play printers” 

click Next.

Note:  

Local Printer is used to create a TCP/IP port connections to a network enabled printer over the 

network. The NAS 2000s only supports network attached printers and does not support directly 

connected printers via USB or Parallel Port.

8. Select Create a new port, and select Standard TCP/IP Port (recommended). 

9. The Add Standard TCP/IP Printer Port Wizard starts. Click Next. 

10. Type the name or IP address of the printer. The IP address is usually listed on the printer 

configuration page. The wizard completes the Port Name field. Click Next.

11. The wizard attempts to connect to the printer. If the wizard is able to connect, the 

Completing the Add Standard TCP/IP Printer Port Wizard page appears, and click 
Finish. If the wizard is not able to connect, the Additional Port Information Required 
page appears. 

a.

Verify that the ip address or name that was entered is correct. 

b.

Select Standard to identify the printer network adapter. A list of manufacturers and 
models of the network adapters will be displayed. Select the appropriate printer from 
the Standard list. 

c.

If the printer network adapter uses nonstandard settings, click Custom and then click 
Settings. The Configure Standard TCP/IP Port Monitor page appears. Specify the 
settings that are recommended by the manufacturer of the printer network adapter, and 
then click OK. 

d. Click Next.

12. Select the manufacturer and the type of printer from the presented list, click Next. If the 

printer does not exist in the list, click have disk and load the drivers or select a compatible 
driver.

13. Enter the name of the desired printer to be presented on the NAS device, click Next.

14. Enter a Share Name for the printer that will used on the network, click Next.

15. Enter a location description and a comment, click Next.

16. Select Print a test page and click Next.

17. Uncheck the restart the add printer wizard if adding only one printer, click Finish.

18. A test page will printer, click ok if the page printed otherwise select troubleshoot.

19. If the restart the add printer wizard was selected the wizard will restart to add an additional 

printer. Repeat the steps above for adding an additional printer.

Summary of Contents for 345646-001 - StorageWorks NAS 2000s External Storage Server









































































































































































































Reviews:

No comments

Related manuals for 345646-001 - StorageWorks NAS 2000s External Storage Server

G-Technology G-RAID Studio Instructions Manual preview
G-RAID Studio
Brand: G-Technology Pages: 32
G-Technology G-DRIVE ev ATC Product Manual preview
G-DRIVE ev ATC
Brand: G-Technology Pages: 35
DANE-ELEC SO MOBILE Datasheet preview
SO MOBILE
Brand: DANE-ELEC Pages: 2
H3C S12500R-2L Installation Manual preview
S12500R-2L
Brand: H3C Pages: 77
GDC SX-2000A Series User Manual preview
SX-2000A Series
Brand: GDC Pages: 185
Feig Electronic ID ISC.LRM200-A/B Installation Instructions Manual preview
ID ISC.LRM200-A/B
Brand: Feig Electronic Pages: 20
Moxa Technologies ioLogik W5300 Series User Manual preview
ioLogik W5300 Series
Brand: Moxa Technologies Pages: 177
NETGEAR DG834GT - 108 Mbps Super G Wireless ADSL Router Specifications preview
DG834GT - 108 Mbps Super G Wireless ADSL Router
Brand: NETGEAR Pages: 2
Tab e.module L5.1 Operation Manual preview
e.module L5.1
Brand: Tab Pages: 26
E-LINX EIR410-2SFP-T User Manual preview
EIR410-2SFP-T
Brand: E-LINX Pages: 24
WiebeTech RTX400-SV User Manual preview
RTX400-SV
Brand: WiebeTech Pages: 5
IBM 7208 345 Service Manual preview
7208 345
Brand: IBM Pages: 68
Quantum Snap! Server 4000 Quick Start Manual preview
Snap! Server 4000
Brand: Quantum Pages: 8
Planet WNAP-7335 Quick Installation Manual preview
WNAP-7335
Brand: Planet Pages: 2
Teldat G1N Installation Manual preview
G1N
Brand: Teldat Pages: 23
Ubiquiti EdgeRouter X Quick Start Manual preview
EdgeRouter X
Brand: Ubiquiti Pages: 20
GARANT GridLine 930505 Instruction Manual preview
GridLine 930505
Brand: GARANT Pages: 116
iStorage Diskashur2 Quick Start Manual preview
Diskashur2
Brand: iStorage Pages: 2

Brands by name

Popular brands

Load more brands