manualshive.com logo in svg

HP 340 G3, Maintenance And Service Manual, Page: 61 / 112

Share
Download
HP 340 G3 Maintenance And Service Manual Download Page 61

System board

NOTE:

The system board spare part kit includes replacement thermal materials.

Description

Spare part number

System board (includes replacement thermal materials):

All system boards use the following part numbers:

xxxxxx-001: Windows 7 or non-Windows operating systems

xxxxxx-601: Windows 10 operating system

 

For use in HP Notebook PC models with UMA graphics memory

 

●

Intel Core i7-6500U processor (full featured models)

845206-xxx

●

Intel Core i7-6500U processor (defeatured models)

855545-xxx

●

Intel Core i5-6200U processor (full featured models)

845205-xx1

●

Intel Core i5-6200U processor (defeatured models)

855544-xx1

●

Intel Core i3-6100U processor (full featured models)

845204-xx1

●

Intel Core i3-6100U processor (defeatured models)

855543-xx1

●

Intel Celeron 3855U processor (full featured models)

845203-xx1

●

Intel Celeron 3855U processor (defeatured models)

855542-xx1

●

Intel Celeron 3215U processor

845202-xx1

For use in HP Notebook PC models with 2 GB of discrete graphics memory

 

●

Intel Core i7-6500U processor (full featured models)

845201-xx1

●

Intel Core i7-6500U processor (defeatured models)

854105-xx1

●

Intel Core i7-5500U processor

855546-xx1

●

Intel Core i5-6200U processor (full featured models)

845200-xx1

●

Intel Core i5-6200U processor (defeatured models)

855541-xx1

●

Intel Core i5-5200U processor

845199-xx1

●

Intel Core i3-6100U processor (full featured models)

845198-xx1

●

Intel Core i3-6100U processor (defeatured models)

855540-xx1

●

Intel Core i3-5005U processor

845197-xx1

●

Intel Celeron 3855U processor

845196-xx1

Before removing the system board, follow these steps:

1.

Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the 
computer on, and then shut it down through the operating system.

2.

Disconnect all external devices connected to the computer.

3.

Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then 
unplugging the AC adapter from the computer.

Component replacement procedures

53

Summary of Contents for 340 G3

















































































































Reviews:

No comments