HP 340 G3 Page 50 Maintenance And Service Manual Download

Page: 50 / 112

RTC battery

Description

Spare part number

RTC battery

718440-001

Before removing the RTC battery, follow these steps:

Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.

Disconnect all external devices connected to the computer.

Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.

Remove the battery (see

Battery on page 26

Remove the optical drive (see

Optical drive on page 27

), if installed.

Remove the bottom cover (see

Bottom cover on page 34

To remove the RTC battery:

▲

Using a thin tool or screwdriver, disengage the battery from the socket (1), and then remove the battery
(2).

Reverse this procedure to install the RTC battery.

Chapter 6 Removal and replacement procedures for Authorized Service Provider parts

Summary of Contents for 340 G3

















































































































Search results

Summary of Contents for 340 G3

Reviews:

Related manuals for 340 G3

Brands by name

Popular brands

HP 340 G3, Maintenance And Service Manual

Search results

Summary of Contents for 340 G3

Reviews:

Related manuals for 340 G3

Brands by name

Popular brands