manualshive.com logo in svg

HP 340 G2, Maintenance And Service Manual

Share
Download
HP 340 G2 Maintenance And Service Manual Download Page 61

Description

Spare part number

Equipped with an Intel Core i3-4005U 1.70-GHz processor (dual core, 15 W), an AMD Radeon R5 M240 
(Jet S3 XT) graphics subsystem with 2.0-GB of discrete memory, and the Windows 8 Professional 
operating system

788314-601

Equipped with an Intel Core i3-4005U 1.70-GHz processor (dual core, 15 W), an AMD Radeon R5 M240 
(Jet S3 XT) graphics subsystem with 2.0-GB of discrete memory, and the Windows 8 Standard 
operating system

788314-501

Equipped with an Intel Core i3-4005U 1.70-GHz processor (dual core, 15 W), an AMD Radeon R5 M240 
(Jet S3 XT) graphics subsystem with 2.0-GB of discrete memory, and a non-Windows 8 operating system

788314-001

Equipped with an Intel Celeron 3205U 1.50-GHz processor (2.0-MB L3 cache, dual core, 15 W), an AMD 
Radeon R5 M240 (Jet S3 XT) graphics subsystem with 2.0-GB of discrete memory, and the Windows 8 
Professional operating system

796410-601

Equipped with an Intel Celeron 3205U 1.50-GHz processor (2.0-MB L3 cache, dual core, 15 W), an AMD 
Radeon R5 M240 (Jet S3 XT) graphics subsystem with 2.0-GB of discrete memory, and the Windows 8 
Standard operating system

796410-501

Equipped with an Intel Celeron 3205U 1.50-GHz processor (2.0-MB L3 cache, dual core, 15 W), an AMD 
Radeon R5 M240 (Jet S3 XT) graphics subsystem with 2.0-GB of discrete memory, and a non-Windows 8 
operating system

796410-001

Equipped with an Intel Core i7-5500U 2.40-GHz (SC Turbo up to 3.00-GHz) processor (4.0-MB L3 cache, 
dual core, 15 W), TPM, a UMA graphics subsystem, and the Windows 8 Professional operating system

799458-601

Equipped with an Intel Core i7-5500U 2.40-GHz (SC Turbo up to 3.00-GHz) processor (4.0-MB L3 cache, 
dual core, 15 W), TPM, a UMA graphics subsystem, and the Windows 8 Standard operating system

799458-501

Equipped with an Intel Core i7-5500U 2.40-GHz (SC Turbo up to 3.00-GHz) processor (4.0-MB L3 cache, 
dual core, 15 W), TPM, a UMA graphics subsystem, and a non-Windows 8 operating system

799458-001

Equipped with an Intel Core i7-5500U 2.40-GHz (SC Turbo up to 3.00-GHz) processor (4.0-MB L3 cache, 
dual core, 15 W), a UMA graphics subsystem, and the Windows 8 Professional operating system

796409-601

Equipped with an Intel Core i7-5500U 2.40-GHz (SC Turbo up to 3.00-GHz) processor (4.0-MB L3 cache, 
dual core, 15 W), a UMA graphics subsystem, and the Windows 8 Standard operating system

796409-501

Equipped with an Intel Core i7-5500U 2.40-GHz (SC Turbo up to 3.00-GHz) processor (4.0-MB L3 cache, 
dual core, 15 W), a UMA graphics subsystem, and a non-Windows 8 operating system

796409-001

Equipped with an Intel Core i5-5200U 2.20-GHz (SC Turbo up to 2.70-GHz) processor (3.0-MB L3 cache, 
dual core, 15 W), a UMA graphics subsystem, TPM, and the Windows 8 Professional operating system

799457-601

Equipped with an Intel Core i5-5200U 2.20-GHz (SC Turbo up to 2.70-GHz) processor (3.0-MB L3 cache, 
dual core, 15 W), a UMA graphics subsystem, TPM, and the Windows 8 Standard operating system

799457-501

Equipped with an Intel Core i5-5200U 2.20-GHz (SC Turbo up to 2.70-GHz) processor (3.0-MB L3 cache, 
dual core, 15 W), a UMA graphics subsystem, TPM, and a non-Windows 8 operating system

799457-001

Equipped with an Intel Core i5-5200U 2.20-GHz (SC Turbo up to 2.70-GHz) processor (3.0-MB L3 cache, 
dual core, 15 W), a UMA graphics subsystem, and the Windows 8 Professional operating system

796407-601

Equipped with an Intel Core i5-5200U 2.20-GHz (SC Turbo up to 2.70-GHz) processor (3.0-MB L3 cache, 
dual core, 15 W), a UMA graphics subsystem, and the Windows 8 Standard operating system

796407-501

Equipped with an Intel Core i5-5200U 2.20-GHz (SC Turbo up to 2.70-GHz) processor (3.0-MB L3 cache, 
dual core, 15 W), a UMA graphics subsystem, and a non-Windows 8 operating system

796407-001

Equipped with an Intel Core i5-4210U 1.70-GHz processor (dual core, 15 W), a UMA graphics subsystem, 
and the Windows 8 Professional operating system

794603-601

Equipped with an Intel Core i5-4210U 1.70-GHz processor (dual core, 15 W), a UMA graphics subsystem, 
and the Windows 8 Standard operating system

794603-501

Component replacement procedures

53

Summary of Contents for 340 G2






















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands