manualshive.com logo in svg

HP 340 G2, Maintenance And Service Manual

Share
Download
HP 340 G2 Maintenance And Service Manual Download Page 24

Item

Component

Spare part number

 

Equipped with an Intel Core i5-5200U 2.20-GHz (SC Turbo up to 2.70-GHz) processor (3.0-
MB L3 cache, dual core, 15 W), an AMD Radeon R5 M240 (Jet S3 XT) graphics subsystem 
with 2.0-GB of discrete memory, and the Windows 8 Standard operating system

796413-501

 

Equipped with an Intel Core i5-5200U 2.20-GHz (SC Turbo up to 2.70-GHz) processor (3.0-
MB L3 cache, dual core, 15 W), an AMD Radeon R5 M240 (Jet S3 XT) graphics subsystem 
with 2.0-GB of discrete memory, and a non-Windows 8 operating system

796413-001

 

Equipped with an Intel Core i5-4210U 1.70-GHz processor (dual core, 15 W), an AMD Radeon 
R5 M240 (Jet S3 XT) graphics subsystem with 2.0-GB of discrete memory, and the Windows 
8 Professional operating system

788315-601

 

Equipped with an Intel Core i5-4210U 1.70-GHz processor (dual core, 15 W), an AMD Radeon 
R5 M240 (Jet S3 XT) graphics subsystem with 2.0-GB of discrete memory, and the Windows 
8 Standard operating system

788315-501

 

Equipped with an Intel Core i5-4210U 1.70-GHz processor (dual core, 15 W), an AMD Radeon 
R5 M240 (Jet S3 XT) graphics subsystem with 2.0-GB of discrete memory, and a non-
Windows 8 operating system

788315-001

 

Equipped with an Intel Core i3-5010U 2.10-GHz processor (dual core, 15 W), an AMD Radeon 
R5 M240 (Jet S3 XT) graphics subsystem with 2.0-GB of discrete memory, and the Windows 
8 Professional operating system

796412-601

 

Equipped with an Intel Core i3-5010U 2.10-GHz processor (dual core, 15 W), an AMD Radeon 
R5 M240 (Jet S3 XT) graphics subsystem with 2.0-GB of discrete memory, and the Windows 
8 Standard operating system

796412-501

 

Equipped with an Intel Core i3-5010U 2.10-GHz processor (dual core, 15 W), an AMD Radeon 
R5 M240 (Jet S3 XT) graphics subsystem with 2.0-GB of discrete memory, and a non-
Windows 8 operating system

796412-001

 

Equipped with an Intel Core i3-4005U 1.70-GHz processor (dual core, 15 W), an AMD Radeon 
R5 M240 (Jet S3 XT) graphics subsystem with 2.0-GB of discrete memory, and the Windows 
8 Professional operating system

788314-601

 

Equipped with an Intel Core i3-4005U 1.70-GHz processor (dual core, 15 W), an AMD Radeon 
R5 M240 (Jet S3 XT) graphics subsystem with 2.0-GB of discrete memory, and the Windows 
8 Standard operating system

788314-501

 

Equipped with an Intel Core i3-4005U 1.70-GHz processor (dual core, 15 W), an AMD Radeon 
R5 M240 (Jet S3 XT) graphics subsystem with 2.0-GB of discrete memory, and a non-
Windows 8 operating system

788314-001

 

Equipped with an Intel Celeron 3205U 1.50-GHz processor (2.0-MB L3 cache, dual core, 15 
W), an AMD Radeon R5 M240 (Jet S3 XT) graphics subsystem with 2.0-GB of 
discrete memory, and the Windows 8 Professional operating system

796410-601

 

Equipped with an Intel Celeron 3205U 1.50-GHz processor (2.0-MB L3 cache, dual core, 15 
W), an AMD Radeon R5 M240 (Jet S3 XT) graphics subsystem with 2.0-GB of 
discrete memory, and the Windows 8 Standard operating system

796410-501

 

Equipped with an Intel Celeron 3205U 1.50-GHz processor (2.0-MB L3 cache, dual core, 15 
W), an AMD Radeon R5 M240 (Jet S3 XT) graphics subsystem with 2.0-GB of 
discrete memory, and a non-Windows 8 operating system

796410-001

 

Equipped with an Intel Core i7-5500U 2.40-GHz (SC Turbo up to 3.00-GHz) processor (4.0-
MB L3 cache, dual core, 15 W), TPM, a UMA graphics subsystem, and the Windows 8 
Professional operating system

799458-601

 

Equipped with an Intel Core i7-5500U 2.40-GHz (SC Turbo up to 3.00-GHz) processor (4.0-
MB L3 cache, dual core, 15 W), TPM, a UMA graphics subsystem, and the Windows 8 
Standard operating system

799458-501

16

Chapter 3   Illustrated parts catalog

Summary of Contents for 340 G2






















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands