HP 255 G4 Maintenance And Service Manual Download Page 16

Page: 16 / 108

Component

Description

WARNING!

To reduce the risk of personal injury, adjust the

volume before putting on headphones, earbuds, or a headset.
For additional safety information, refer to the

Regulatory,

Safety, and Environmental Notices

To access this document:

▲

From the Start screen, type

support

, and then select the

HP Support Assistant

app.

‒

or –

From the Windows desktop, click the question mark icon in
the notification area, at the far right of the taskbar.

NOTE:

When a device is connected to the jack, the computer

speakers are disabled.

NOTE:

Be sure that the device cable has a 4-conductor

connector that supports both audio-out (headphone) and audio-
in (microphone).

Top

TouchPad

Component

Description

(1)

TouchPad zone

Reads your finger gestures to move the pointer or activate
items on the screen.

(2)

Left TouchPad button

Functions like the left button on an external mouse.

(3)

Right TouchPad button

Functions like the right button on an external mouse.

Chapter 2 External component identification

Summary of Contents for 255 G4













































































































Search results

Summary of Contents for 255 G4

Reviews:

Related manuals for 255 G4

Brands by name

Popular brands

HP 255 G4, Maintenance And Service Manual

Search results

Summary of Contents for 255 G4

Reviews:

Related manuals for 255 G4

Brands by name

Popular brands