HP 170X - JetDirect Print Server, Installation And Configuration Manual

Page: 40 / 80

34 CHAPTER 5: FTP PRINTING
Commands
The following table summarizes commands available
to the user during an FTP printing session.
Command Description
user
<username> <username>
specifies a user. Any user will
be accepted and can print to the selected
port.
cd <port#> <port#>
selects a port number for
printing. For HP JetDirect single-port print
servers, only port1 is available. For multiport
print servers, specify
port1
(default),
port2
, or
port3
.
cd/ /
specifies the root directory of the
HP JetDirect FTP server.
quit quit
or
bye
terminates the FTP session
with the HP JetDirect print server.
bye
dir dir
or
ls
displays the contents of the
current directory. If this command is typed
in the root directory, a list of available ports
for printing is displayed. For multiport print
servers, the available ports for printing are
port1
(default),
port2
, and
port3
.
ls
pwd
Displays the current directory or the current
JetDirect printing port.
put
<filename> <filename>
specifies the file to send to
the selected HP JetDirect print server port.
For multiport print servers, a different port
can be specified in the command:
put <filename> <port#>
bin
Configures an FTP binary (image) file
transfer.
ascii
Configures an FTP ASCII file transfer.
HP JetDirect print servers support only non-
print format control for character transfers
(standard values for spacing and margins
are used).
Ctrl-C
Press the
Ctrl
and
C
keyboard keys
simultaneously to abort the FTP service
command and any transfer of data. The
data connection is closed.
rhelp
Displays the FTP commands supported.
Command Description