HP Array Configuration Utility 88
Error
code
Error message
Comment or clarification
configuration. Configure mode can only create
new arrays.
2829
Cannot create Array
The controller will not allow a new array to be
created, either because the controller has no
unassigned physical drives attached or because
the maximum number of arrays or logical drives
has been reached already.
2830
Cannot expand Array
The Array could not be expanded, either because
the controller does not support expansion, or the
current configuration does not allow expansion to
occur on the array.
2831
Cannot change Array Spare
The spare state of the array could not be
changed. This error can occur when you attempt
to add or drop a spare and the current
configuration does not allow a spare state change
for the array.
2832
Invalid physical drive
A specified physical drive is not a valid physical
drive, or it cannot be placed in the array.
2833
Invalid Spare
A specified spare is not a valid spare drive, or it
cannot be placed in the array as a spare.
2834
Invalid logical drive
The logical drive ID is not valid.
2836
New Logical Drive ID does not match the
next available logical drive ID.
If you are attempting to replicate a
configuration that has non-consecutive
logical drive numbers, then you must
change the script file so that the logical
drive numbers are consecutive.
The script file specifies a logical drive ID that is
not the first unused ID in the sequence. For
example, this message appears if the controller
has only Logical Drive 1 and the script file
specifies creation of Logical Drive 3 (omitting
Logical Drive 2). A common cause of this error is
that the input file specifies nonsequential logical
drive numbers. In this case, change the logical
drive numbers in the input file so that they are
sequential.
2837
New Logical Drive ID already exists
This error occurs in Configure mode when the
logical drive ID specified in the script file already
exists in the configuration. In Configure mode,
you can create new logical drives only.
2838
Cannot create Logical Drive
The array has no free space, or the maximum
number of logical drives has been reached
already.
2839
Cannot migrate Logical Drive RAID
The controller does not support RAID migration, or
migration is not possible with the current
controller configuration.
2841
Cannot extend Logical Drive
The controller does not support extension, or the
current controller configuration cannot be
extended. For example, extension is not possible
if the array has no free space.
2842
Invalid RAID
The specified RAID level is invalid or is not
possible with the current physical disk and array
configuration.
