HP Array Configuration Utility 89
Error
code
Error message
Comment or clarification
2843
Invalid Size
The specified size is invalid or is not possible with
the current configuration.
2844
Invalid Stripe Size
The specified stripe size is invalid, not supported
by the current RAID level, or not possible with the
current configuration.
2849
Invalid ClearConfigurationWithDataLoss
parameter
The valid parameters are Yes and No (default).
2850
Controller does not support Chassis
Name
The controller does not support setting a chassis
name.
2851
Invalid Chassis Name
The entered chassis name is invalid. Use
characters from the set a–z, A–Z, 0–9, !, @, #, *,
(, ), ,, -, _, +, :, ., /, and [space]. The name
cannot end with a space character or exceed the
maximum number of characters allowed by the
controller.
2852
Invalid SSP State
The requested SSP state is not a valid SSP state.
2853
Cannot change SSP settings
The SSP settings cannot be changed for the
controller or logical drive.
2854
Invalid SSP Adapter ID
The adapter ID is not a valid adapter ID that was
detected by the controller.
2857
Invalid Surface Scan Delay
—
2861
Controller does not support redundancy
settings
The controller is not redundant or does not
support redundancy settings.
2864
Invalid Preferred Path Mode
The specified value for the preferred path mode is
not valid, or the controller is not available.
2865
Invalid Preferred Path
The specified preferred path is not a valid chassis
slot for an available, active controller, or the
controller is not available.
2866
Failure opening capture file
<text>
—
2867
Failure opening input file
<text>
—
2868
Failure opening error file
<text>
—
2877
There are no suitable spares available
ACU found no drives that could be used as spares
for the specified array.
2880
Invalid Physical Disk Type Specified
—
2882
Invalid MNP delay
The specified value for MNP delay is invalid.
3000
Invalid Option
The value of the option supplied to this parameter
is invalid.
3002
Command Failed
The controller returned an error for a command.
3003
License Key Delete Failed
ACU is unable to delete the license key.
3004
Invalid Sector Size
—
3005
Cannot delete Array
—
