HP Array Configuration Utility 54
ACU displays possible logical drive configurations based on groupings of drives with the same
capacity.
4.
For each logical drive, select a RAID Type.
ACU identifies possible RAID configurations and lists spare drive capability, the size of the logical
drive, fault tolerance, and write performance.
5.
Click
Next
.
The wizard configures the arrays and logical drives.
6.
When the configuration is complete, click
Finish
.
Using the ACU CLI
The ACU CLI has two operating modes:
•
Console mode ("
Opening the CLI in Console mode
" on page
54
)
You can adjust several configuration parameters on several devices without having to restart ACU
each time.
•
Command mode ("
Opening the CLI in Command mode
" on page
55
)
You can make an isolated change of just one configuration parameter on one device.
Opening the CLI in Console mode
The syntax of the command required to open the ACU CLI in Console mode depends on the operating
system that you are using.
•
For Microsoft® Windows®, enter the following text:
