hp fax 1230 series
use the fax features
12
check for dial tone
Before using the fax features, verify that the connections are correctly
established.
Note:
Make sure the volume is turned on. If you turn off the volume for your
HP Fax, you will not hear the dial tone. To verify that the volume is turned
on, see
adjust the volume
on page 24.
1
Press
Fax
, and then press
Start, Black
or
Start, Color
.
2
Listen for a dial tone.
3
If you do not hear a dial tone, check the connections.
4
Press
Cancel
to hang up.
Note:
For information on troubleshooting the connections, see
fax problems
on page 53.
send a basic fax
Follow these steps to send a fax:
1
Load your original in the automatic document feeder (ADF).
For more information, see
load originals
on page 5.
2
Enter the fax number using the keypad, use one of the one-touch speed-dial
buttons, or press
Speed Dial
until the desired speed-dial entry appears. (For
more information on speed-dialing, see
set up speed-dialing
on page 15.)
3
Press
Start, Black
or
Start, Color
.
send a fax after temporarily changing settings
You can make changes to fax settings that will only affect the current fax job. For
example, you may want to temporarily change the resolution to
Photo
when you
are faxing a photo; you may not, however, want to change the default setting to
Photo
for all your fax jobs. Follow these steps to make temporary changes to your
fax settings and then send the fax:
1
Load your original in the ADF.
For more information, see
load originals
on page 5.
2
Press
Fax
to scroll through the fax settings.
3
When you reach the setting you want to change, press
to scroll through
the setting options.You can change the resolution, contrast, and a number
of other settings.
4
When you reach the setting you want to change, press
Enter
to accept the
setting.
5
Enter the fax number using the keypad, use one of the one-touch speed-dial
buttons, or press
Speed Dial
until the desired speed-dial entry appears. (For
more information on speed-dialing, see
set up speed-dialing
on page 15.)
6
Press
Start, Black
or
Start, Color
to send the fax.
Tip —
If you want to change additional fax settings before sending
the fax, press
Fax
again. When you reach the setting you want to
change, press to scroll through the setting options. When you
reach the option you want to change, press
Enter
to accept it.
Summary of Contents for 1230 - Fax Color Inkjet
