HP 12200, User Manual

Page: 31 / 205

Figure 8 Confirm Destroy Storage Pool window
4. Select Next to destroy the pool.
A second page of the Confirm Destroy <storagepool name> screen is displayed, containing
the following text: WARNING: Existing data in StoragePool # will be destroyed and cannot
be recovered. This step cannot be reversed.
5. Select Finish to display the screen confirming that the storage pool has been destroyed.
6. Select Finish again to return to the system screen.
You can now either use the LUNs previously assigned to the destroyed pool in other pools,
or they can be deleted.
To delete all storage pools:
1. Open a Command View VLS session and log in as the administrator. See “Opening a
Command View VLS Session from a Web Browser” (page 79) .
2. In the Storage tab navigation tree, select Storage Pools .
3. If you wish to destroy all storage pools, from the task bar, select Destroy All Storage Pools .
The Confirm Destroy All Storage Pools screen is displayed.
4. Select Next to destroy the pools.
Either recreate storage pools using the LUNs previously assigned to the destroyed pool(s), or
delete them.
Installing Additional Licenses
Your VLS system may require any of the following licenses:
•
Capacity:
A VLS capacity license must be installed on the VLS when you add additional EVA array LUNs
beyond the ten base licenses included with each node.
If you are in a license violation state, all VLS read/write operations are disabled until either
sufficient licenses are installed to support the storage, or the excess storage is removed. When
you have cleared a license violation by installing an upgrade capacity license, the VLS
read/write operations are automatically enabled without requiring a reboot.
Installing Additional Licenses 31