HP 1010nr - Mini - Atom 1.6 GHz, Maintenance And Service Manual

Page: 85 / 105

3. Open a word-processing document, click Edit , and then click Paste .
4. Save the document.
●
You can back up your information to an optional external hard drive, a network drive, or discs.
●
When backing up to discs, use any of the following types of discs (purchased separately): CD-R,
CD-RW, DVD+R, DVD-R, or DVD±RW. The discs you use depend on the type of optical drive
you are using.
NOTE: The external optical drive must be connected to the USB port on the computer , not to a
USB port on another external device, such as a hub or docking station.
NOTE: DVDs store more information than CDs, so using them for backup reduces the number
of recovery discs required.
●
When backing up to discs, number each disc before inserting it into an optical drive.
Creating a set of recovery discs
HP recommends that you create recovery discs to be sure that you can restore your system to its
original factory state if you experience serious system failure or instability. Create these discs after
setting up the computer for the first time.
NOTE: This task will require an optional external optical drive. The external optical drive must be
connected to the USB port on the computer , not to a USB port on another external device, such as a
hub or docking station.
Handle these discs carefully and keep them in a safe place. The software allows the creation of only
one set of recovery discs.
Note the following guidelines before creating recovery discs:
●
You will need high-quality DVD-R, DVD+R, BD-R (writable Blu-ray), or CD-R discs. All these
discs are purchased separately. DVDs have a larger storage capacity than CDs. If you use CDs,
up to 20 discs may be required, whereas only a few DVDs are required.
NOTE: Double-layer discs and read-write discs—such as CD-RW, DVD±RW, and BD-RE
(rewritable Blu-ray) discs—are not compatible with the Recovery Manager software.
●
■ The computer must be connected to AC power during this process.
●
■ Only one set of recovery discs can be created per computer.
●
■ Number each disc before inserting it into an optical drive.
●
If necessary, you can exit the program before you have finished creating the recovery discs. The
next time you open Recovery Manager, you will be prompted to continue the disc creation
process.
To create a set of recovery discs:
1. Click Start , click All Programs , click Recovery Manager , and then click Recovery Disc
Creation .
2. Follow the on-screen instructions.
Windows 7 77