6.
Release the ZIF connector
(2)
to which the TouchPad cable is connected, and then disconnect
the TouchPad cable
(3)
from the system board.
7.
Remove the five Phillips PM2.0×6.0 screws that secure the top cover to the base enclosure.
8.
Release the top cover
(1)
by lifting the rear edge until it disengages from the base enclosure.
Component replacement procedures
53
Summary of Contents for 1010nr - Mini - Atom 1.6 GHz
Page 1: ...HP Mini 2102 HP Mini 210 and Compaq Mini 210 Maintenance and Service Guide ...
Page 4: ...iv Safety warning notice ...
Page 8: ...Index 94 viii ...
Page 105: ......