HP 1010nr - Mini - Atom 1.6 GHz Maintenance And Service Manual Download

Page: 19 / 105

item

Component

Description

(6)

USB port

Connects an optional USB device.

(7)

Audio-out (headphone) jack/Audio-in (microphone) jack

Produces sound when connected to optional powered
stereo speakers, headphones, earbuds, a headset, or
television audio. Also connects an optional headset
microphone.

NOTE:

When an audio component is connected to the

jack, the computer speakers are disabled. The audio
component cable must have a 4-conductor connector.

Display components

item

Component

Description

(1)

Internal display switch

Initiates Standby if the display is closed while the power
is on.

NOTE:

The display switch is not visible from the

outside of the computer.

(2)

Webcam light

On: The webcam is in use.

(3)

Webcam

Records video and captures still photographs.

NOTE:

To capture videos, you need to install

additional webcam software.

(4)

Internal microphone

Records sound.

Display components

Summary of Contents for 1010nr - Mini - Atom 1.6 GHz










































































































Search results

Summary of Contents for 1010nr - Mini - Atom 1.6 GHz

Reviews:

Related manuals for 1010nr - Mini - Atom 1.6 GHz

Brands by name

Popular brands

HP 1010nr - Mini - Atom 1.6 GHz, Maintenance And Service Manual

Search results

Summary of Contents for 1010nr - Mini - Atom 1.6 GHz

Reviews:

Related manuals for 1010nr - Mini - Atom 1.6 GHz

Brands by name

Popular brands