HP 1010nr - Mini - Atom 1.6 GHz Page 67 Maintenance And Service Manual Download

Page: 67 / 105

Release the WLAN antenna cables

(1)

from the clips built into the base enclosure

(2)

Turn the computer right-side up, with the front toward you.

Open the computer as far as it will open.

Disconnect the display panel cable

(1)

from the system board.

Release the wireless antenna cables

(2)

from the clip built into the base enclosure.

CAUTION:

Support the display assembly when removing the following screws. Failure to

support the display assembly can result in damage to the display assembly and other device
components.

Component replacement procedures

Summary of Contents for 1010nr - Mini - Atom 1.6 GHz










































































































Search results

Summary of Contents for 1010nr - Mini - Atom 1.6 GHz

Reviews:

Related manuals for 1010nr - Mini - Atom 1.6 GHz

Brands by name

Popular brands

HP 1010nr - Mini - Atom 1.6 GHz, Maintenance And Service Manual

Search results

Summary of Contents for 1010nr - Mini - Atom 1.6 GHz

Reviews:

Related manuals for 1010nr - Mini - Atom 1.6 GHz

Brands by name

Popular brands