background image

3  Connecting to a Windows NT Server 3.51

Windows NT Workstation Version 3.51

11

From the “Drop Down List”, scroll down and select “<Other> Requires 
disk from manufacturer”, then click “Continue“.

12

Set the path to “A:\NT” in the “Insert Disk” dialog box, and then insert the 
disk  4 of 6 , Auto LANStreamer  PCI drivers disk. (If you have an HP 
preloaded HDD, set path to “C:\LANDRV\LNSTRM\DISK4\NT\”)

13

Click “OK” at the “Install  Driver” dialog box. 

14

Select “IBM Streamer Family Adapters” in the “Select OEM Option” dialog 
box, and click “OK”. 

15

Click on the “OK” button in the “IBM Auto LANStreamer PCI Adapter” 
dialog box.

16

Choose the default Protocol TCP/IP, and any additional  Network 
Protocols by clicking the check boxes in the “Windows NT Setup” dialog 
box, and click “Continue.”  (If you do not have the required information, 
contact your network administrator)

17

Check the boxes to add additional TCP/IP components, and  click on the 
“Continue” button.  

18

Click “OK” for the review of network settings, or “Network Settings” 
dialog box.

19

Set your  IP address information in the “TCP/IP Configuration” dialog box, 
and click “OK”. (If you do not have the required TCP/IP settings, contact 
your network administrator)

20

At the “Domain/Workgroup Settings” dialog box, click on “OK” to accept 
the default “Workgroup” as your workgroup name. (If you do not have the 
required information, contact your network administrator)

21

To complete the installation, remove the floppy disk, and click on “Restart 
Computer” in the “Windows NT Workstation Networking Setup” dialog 
box.

Summary of Contents for 04H8095





























Reviews: