2 Connecting to a Netware 4.11 Server
Windows 95 SR2
Windows 95 SR2
Requirements
•
HP Vectra with Windows 95 SR2 installed.
•
IBM LANStreamer 16/4 PCI TR adapter and drivers diskettes ver 1.01.
•
Driver Name: Windows 95 Default
•
Novell Netware 4.11 server that supports Net BEUI, NWLink IPX/SPX,
and NWLink NetBIOS transfer protocols.
Device Configuration
•
Interrupt
9 (2)
•
I/O Address
FCC0-h
Procedure
1
With the HP Vectra turned off install the IBM LANStreamer 16/4 PCI TR
adapter card into a PCI slot.
2
Insert the IBM LANStreamer TR drivers disk 1 of 6 (AUTO LANStreamer
PCI Diagnostic Disk) and power on the machine.
3
After the machine boots, verify that the adapter finished testing and that
the adapter is “OK.”
4
Click on “F3” to exit, and then press “CTRL+ALT+DEL.”
5
Upon booting, Windows 95 will automatically recognize the adapter. Click
on “Next.”
6
When prompted, click on “Other Locations.”
7
Insert drivers disk 4 of 6 (Auto LANStreamer PCI NDIS 3.0 Driver
Diskette), set the path to “A:\” and click “OK.” (If you have an HP
preloaded HDD, set the path to “C:\LANDRV\LNSTRM\DISK4\”)
8
Verify that “IBM Auto LANStreamer PCI Adapter (NDIS3)” is listed and
click on “Finish.”
9
When prompted to insert disk labeled “IBM Streamer Family Adapter
Option Diskette”, click on “OK.”
10
Insert disk 2 of 6 (Auto LANStreamer PCI Driver Diskette), set the path
to “A:\” and click “OK.” (If you have an HP preloaded HDD, set the path
to “C:\LANDRV\LNSTRM\DISK2\”)
11
At the “Copying Files” window, click on “OK.”
Summary of Contents for 04H8095
Page 1: ...Auto LANstreamer PCI Adapter 04H8095 Installation Guide ...
Page 27: ......
Page 28: ...Version Number Lans PCI Rev 1 ...