1 Connecting to a Netware 3.12 Server
Windows for Workgroups
1 Connecting to a Netware 3.12 Server
Windows for
Workgroups
Requirements
•
HP Vectra with DOS and MS-Windows for Workgroups 3.11 installed.
•
IBM LANStreamer 16/4 PCI TR adapter and drivers diskettes ver 1.01.
•
Driver Name: IBMMPC.DOS Size: 59KB Date: 5/22/95
•
Novell Netware server that supports Net BEUI, NWLink IPX/SPX, and
NWLink NetBIOS transfer protocols.
•
Netware client for DOS and MS-Windows.
Device Configuration
•
Interrupt
9 (2)
•
I/O Address
FCC0-h
Procedure
1
With the HP Vectra turned off install the IBM LANStreamer 16/4 PCI TR
adapter card into a PCI slot.
2
Insert the IBM LANStreamer TR drivers disk 1 of 6 (AUTO LANStreamer
PCI Diagnostic Disk) and power on the machine.
3
After the machine boots, verify that the adapter finished testing and that
the adapter is “OK.”
4
Click on “F3” to exit, and then press “CTRL+ALT+DEL.”
5
Boot the machine to a DOS prompt, and Netware client for DOS and MS-
Windows disk 1.
6
Execute INSTALL.EXE and set lines 1-5 as listed below;
•
C:\NWCLIENT
•
YES
•
YES
C:\WINDOWS
•
NO
Summary of Contents for 04H8095
Page 1: ...Auto LANstreamer PCI Adapter 04H8095 Installation Guide ...
Page 27: ......
Page 28: ...Version Number Lans PCI Rev 1 ...
