3 Connecting to a Windows NT Server 3.51
Windows NT Workstation Version 3.51
Windows NT
Workstation
Version 3.51
Requirements
•
HP Vectra with Microsoft Windows NT Workstation 3.51 installed.
•
IBM AUTO LANStreamer PCI Drivers diskettes Ver. 3.04
•
Driver Name: OEMSETUP.inf Size: 67KB Date: 10/18/96
•
Microsoft Windows NT Workstation 3.51 and Service Pack Media.
•
Microsoft Windows NT Server 3.51machine that supports Net BEUI, TCP/
IP, NWLink IPX/SPX, and NWLink NetBIOS transfer protocols.
Device Configuration
•
I/O Base Address
FC00h
•
Interrupt Request Level
9
Procedure
1
With the HP Vectra turned off install the IBM LANStreamer 16/4 PCI TR
adapter card into a PCI slot.
2
Insert the IBM LANStreamer TR drivers disk 1 of 6 (AUTO LANStreamer
PCI Diagnostic Disk) and power on the machine.
3
After the machine boots, verify that the adapter finished testing and that
the adapter is “OK.”
4
Click on “F3” to exit, and then press “CTRL+ALT+DEL.”
5
After windows loads, open the “MAIN” program group , and double-click
on “Control Panel” Icon.
6
Select the “Network” icon in the “Control Panel” program group.
7
Click on “YES” in the “Network Settings“ dialog box, and NT Networking
will be installed on your computer.
8
Insert the Windows NT Workstaion CD.
9
In the “Windows NT Setup” enter the path to your NT files, and click on
the “Continue” button. (If you have an HP preloaded HDD, set path to
“C:\I386”)
10
Click on the “Do Not Detect” button from the “Network Adapter Card
Detection” dialog box, and click on “Continue” in the second “Network
Adapter Card Detection” dialog box.
Summary of Contents for 04H8095
Page 1: ...Auto LANstreamer PCI Adapter 04H8095 Installation Guide ...
Page 27: ......
Page 28: ...Version Number Lans PCI Rev 1 ...
