Housegard SA411S, User Manual

Page: 10 / 60

10 - English
ATTENTION: THIS SMOKE ALARM AND ALL WIRING MUST BE INSTALLED BY QUALIFIED/
LICENSED ELECTRICIANS ONLY.
CAUTION: MAKE SURE THAT EACH SMOKE ALARM IS INTERCONNECTED. TEST THE INTERCONNECTED
SMOKE ALARMS BY PRESSING THE TEST BUTTON FOR 10 SECONDS. IF ALL INTERCONNECTED SMOKE
ALARMS SOUNDS AN ALARM, IT MEANS INTERCONNECT FUNCTION IS WORKING PROPERLY.
WARNING: FAILURE TO FOLLOW ANY OF THE INSTRUCTIONS ABOVE COULD LEAD TO MALFUNCTION
AND DAMAGE TO THE SMOKE ALARMS.
Use minimum of 1 mm
2
250V insulated wire for all wiring including interconnecting
MEANING OF THE DIFFERENT LED
AND ALARM SIGNALS
Mode Sounder LED
Normal - Green LED Indicates normal operation
Test Loud, pulsating alarm Red LED flashes rapidly
Alarm Loud, pulsating alarm Red LED flashes rapidly
HUSH Chirp every 32 sec. for
approx. 10 min -
Low battery warning Beep every 32 sec -