ON
OFF
AUTO OPEN SERIES
AUTO OPEN SERIES
PAGE 7
Turning the System On
SWITCH THE SYSTEM ON
See the diagram below for switch placement.
NOTE:
The Auto Open 6x6 Press is equipped with an Auto Sleep Mode. When the machine is not in use for a
period of two hours, it will enter an energy saving sleep mode. To restore to normal operating mode, press any
button on the display panel and allow the heat press to return to the target temperature
Locate the packaging bolt positioned on the top-center of the press.
Packaging bolt must be removed prior to turning the press on or
operating the press.
Now, locate the Power ON/OFF
Switch on the side of the press,
then turn the Power Switch on.
2.
Power ON/OFF Switch