AUTO OPEN SERIES
PAGE 10
ADJUST THE PRESSURE
First, locate the LED Display on the Press.
(See figure 1)
The Pressure Adjustment Knob is located in
the center of the heat platen
(See figure 2)
Adjust the pressure by turning the knob
clockwise to increase pressure and counter
clockwise to decrease pressure.
PRESSURE READOUT
A visual Pressure Readout is located on the lower right side of the LED Display.
When the handle is locked into the Print Position, a pressure number will be
displayed. Readout will be on a scale of 0 - 9. A 0 Pressure readout would
indicate no pressure at all and 9 would indicate very heavy pressure.
(See figure 1)
To adjust the Pressure, simply turn the Pressure Adjustment
Knob to the right or clockwise to increase the Pressure and to
the left or counter clockwise to decrease the Pressure. The
readout will display the Pressure when locked down in the
print position.
REMEMBER:
To allow for the thickness of your garment
when adjusting the pressure.
WARNING:
Structural damage caused by excessive pressure is not covered under the limited warranty!
Adjusting the Pressure
5.
1 - 3 = Light Pressure
4 - 7 = Medium Pressure
8 - 9 = Heavy Pressure
Figure 1
Figure 2
Pressure Adjustment Knob
