OVEN
(continued)
How to Delay Start of Cleaning
Quick Reminder:
1. Press the
pad.
2. Press the INCREASE or DECREASE
.
I
desired
Time appears.
The earliest Stop Time will be the Clean Time
selected plus the time of day. For example: the
Clean Time is hours and the time of
is
Stop Time that appears in the display will be
Press the STOP TIME pad.
4. Press the INCREASE or DECREASE pad
the desired Stop Time appears in the display.
Start is setting the oven timer to start the clean
automatically at later time than the present
time of’ day.
NOTE: Before beginning, make sure the oven clock
shows the correct time of day.
1. Follow steps to prepare the oven for cleaning.
2. Press the CLEAN pad.
3. Press the INCREASE or DECREASE pad to enter
the Clean Time.
4. Press the STOP TIME pad. “STOP TIME”
and the earliest Stop Time you can set will
appear in the display.
I
Press the INCREASE pad to change the Stop Time
to a later time of
if desired. For example:
you set Stop Time 1 I
oven will star{ clean
cycle at
and end at 11
The door latches
automatically.
The self-clean
will automatically begin
“CLEAN” is displayed and the time for the Clean
cycle is set. The words “ON”
“LOCK” will
appear in the display when the door automatically
locks. It will not be possible to open the oven door
until the temperature drops below the lock
temperature and the LOCK
goes off.
6. When the LOCK light is
open
NOTE: During a delayed self-clean operation
can find out when the oven is set to turn on by
pressing and holding the CLEAN pad for seconds.
Questions and Answers
If my oven clock is not set to the correct time of
day, can I still self-clean my oven?
A. If the clock is not set to the correct time of day you
will not be able set a delay clean to end at a
specific time.
Q. Can 1 use commercial oven cleaners on any part
of my self-cleaning oven?
A. No cleaners or coatings should be used around any
part of this
If you do use them and do not
thoroughly rinse the oven with water, wiping it
absolutely clean afterwards, the residue can scar
the oven surface and damage metal parts the next
time the oven is automatically cleaned.
Q. What causes the hair-like lines on the enameled
surface of my oven?
A. This is a
condition, resulting from heating
cooling during cleaning. These lines do not
affect how your oven performs.
Q. What should I do if excessive smoking occurs
during
A. This is
by excessive soil. Press the
CLEAR/OFF
Open the windows to rid the
room smoke. Wait until the oven has cooled and
the word
is
in the display. Wipe up
the
soil
reset the clean cycle.
Q. My oven shelves do not slide easily.
What is the matter?
A. After many cleanings, the oven shelves may lose
their luster and become hard to slide. To
shelves slide more easily, wipe the shelf supports
with cooking oil.
Q. Is the “crackling” or “popping” sound hear
during cleaning normal?
A. Yes. This is the sound of the metal heating
cooling during both the cooking and cleaning
functions.
Q. Should there be any odor during the cleaning?
A. Yes, there will be an odor during the first few
cleanings. Failure to wipe out excessive soil
also cause a strong odor when cleaning.
Q. Why do I have ash left in my oven after cleaning?
A. Some types
soil
leave a deposit which is ash.
It can be removed with a damp sponge or
Q. My oven shelves have become gray after the
self-clean cycle. Is this normal?
A. Yes. After the self-clean cycle. the
may
lose some luster and change a deep
Q. Can I cook food on the
while the oven
is self-cleaning?
A. Yes, while the oven is self-cleaning, you
use
the
as you normally do.
24
