manualshive.com logo in svg

Hotpoint 96797, Service Information, Page: 30 / 43

Share
Download
Hotpoint 96797 Service Information Download Page 30

30 of 43

Service Manual UK

Whirlpool UK Appliances Ltd

English

9.

The Software version (Su) of the User Interface (UI) will be displayed. Press the Start Button 

. 

The Data Version (ds) will be displayed. These are not relevant to the repair.

10. Press the Start button 

. Set the configuration number for the Control Board (AM) by turning the 

central knob. Refer to the Configuration Code in Specifications or on the Rating Plate of the oven 
for the correct code. For confirmation and advancing onto the next step always press the Start 
button .

11. The Software version (Su) will be displayed. Press the Start button 

. The Data version (EE) of 

the Control Board (AM) will be displayed. Press the Start button 

. The Boot version (Bt) will be 

displayed. These are not relevant to the repair.

12. As soon as the Start button is pressed all the icons of the display are switched on. A beep sounds 

to confirm the alarm message.

An00

Summary of Contents for 96797












































Reviews:

No comments