3
ENGLISH
Top Panel
Front Panel
(Upper)
Storage Bin
Front Panel
(Lower)
Power Cord
Louver
(Air-cooled Model)
Handle
Slope
Air Filter
(Air-cooled Model)
Bin Door
I. INSTALLATION INSTRUCTIONS
1. CONSTRUCTION
2. ACCESSORIES
IM-100NE-HC
CD
1
Scoop
1
Inlet Hose
1
Outlet Hose
1
1/2-3/4 Nipple
-
Leg
4
Connector Cover
1
3/4-3/4 Nipple
-
3. UNPACKING
WARNING
Children should not be allowed in reach of the packaging elements (plastic bags and expanded polystyrene) as they are
potential sources of danger.
CAUTION
Do not lift or manoeuvre the carton by using the shipping bands.
When moving the unit by hand, hold the unit bottom.
Always wear protective gloves when carrying the unit.
When handling the carton or the unpacked unit, work in pair to prevent injury.
NOTICE
Remove shipping carton, tape(s) and packing. If packing material is left in the icemaker, it will not work properly.
1) After removing the packaging, make sure that the icemaker is in good condition.
If in doubt, please do not use the icemaker but apply to professionally qualified
personnel.
2) Remove the shipping tape holding the door and front panel.
3) Remove the protective plastic film from the exterior. If the icemaker is exposed
to the sun or to heat, remove the film after the icemaker cools.
4) Remove the package of accessories. Check the contents according to “2.
ACCESSORIES”.
5) Remove the shipping tape holding the bin control switch by opening the bin door
and reaching in.
Outlet Hose
CD
Inlet Hose
Leg
Connector Cover
Scoop
1/2-3/4
Nipple
3/4-3/4
Nipple
Bin Control
Switch
Bin Door
