8
ENGLISH
2) Wash the bin liner with a neutral non-abrasive cleaner. Rinse thoroughly.
3) Soak a clean cloth with the neutral cleaner, and wipe both sides of the slope and the door inner surface. Wipe off the cleaner
with a clean damp cloth.
4) Either mix 5 litres of water with 18 ml of 5.25% sodium hypochlorite solution in a suitable container, or the recommended
Hoshizaki sanitiser as directed.
5) Soak a clean sponge or cloth with the solution, and wipe the bin liner, bin door and slope.
6) The remaining solution can be used to sanitise utensils.
Note: Do not wipe dry or rinse after sanitising, but allow to air dry.
[d] Air Filter
Plastic mesh air filters remove dirt or dust from the air, and keep the condenser from getting clogged. If the filters get clogged,
the icemaker’s performance will be reduced. Remove and clean the air filter(s) at least twice per month:
1) Slide the air filter off the louver.
2) Clean the air filter by using a vacuum cleaner. When severely clogged, use warm water and a
neutral cleaner to wash the air filter.
3) Rinse and dry the air filter thoroughly.
NOTICE
After cleaning, be sure to place the air filter back in position.
2. BEFORE CALLING FOR SERVICE
WARNING
Do not damage the refrigerant circuit.
[a] Error Code Indication
If the error code “E” is indicated on the display, before calling for service, check the following.
Code
Remedy
E1
Freeze error. Unplug unit and plug it back in after 3 minutes. Clean air filter (air-cooled model). Lower ambient
temperature or ensure adequate clearance around unit (see "I. 4. LOCATION"). If error persists, call for service.
E2
Defrost error. Unplug unit and plug it back in after 3 minutes. If error persists, call for service.
EE
Other error. Unplug unit and plug it back in after 3 minutes. Clean air filter (air-cooled model). Check for water
failure or closed water supply tap. Lower ambient temperature or ensure adequate clearance around unit (see "I. 4.
LOCATION"). If error persists, call for service.
EF
Possible gas leak. Do not touch the unit. Ventilate the area and immediately call for service.
[b] No Error Code Indication
If the icemaker does not work properly or does not work at all and no error code is indicated on the display, before calling for
service, check that:
* The power is supplied to the unit.
* The water is turned on.
* The air filter is clean (air-cooled model).
* The cooling water circuit has a proper flow (water-cooled model).
For further assistance or advice, contact your local Hoshizaki service agent.
Air Filter
Louver