Hoshizaki 877000901, Service Manual

Page: 15 / 32

HOSHIZAKI EUROPE B.V.
Press the key for approx. 2 seconds until
“rCH” appears, then press
until “Pb2” is
displayed. The evaporator temperature is displayed after pressing the key . The display disappears
after briefly pressing or , or automatically after 60 seconds without touching any keys.
Press the key for approx. 2 seconds until
“rCH” appears, then press
until “Pb1” is
displayed. The room temperature is displayed after pressing the key . The display disappears after
briefly pressing or , or automatically after 60 seconds without touching any keys.
Press the key for approx. 2 seconds until
“rCH” appears, then press
until “CH” is
displayed. The counter reading is displayed after pressing the key . The display disappearsafter
briefly pressing or , or automatically after 60 seconds without touching any keys.
Press the key for approx. 2 seconds until
“rCH” appears. If required, press
until
“rCH”
is displayed.
Briefly press the key ;
”0” is displayed. Within 15 seconds, press the key
or to input the password
”149” for resetting the counter and briefly press
.
The indicator
” - -“ flashes on the display for 4 seconds. The counter has been reset.
The controller does not manage separate user parameters except for the temperature set point
“SP”. The alarm settings are configured in the configuration parameters; see below.
15
Setting the alarm limits
Deleting the compressor run time (operating time counter)
Compressor run time display (operating time counter)
Room sensor temperature display
Evaporator sensor temperature display