horsch SW 600, Owner'S Manual

Page: 93 / 100

SW600 Owner’s Manual – Version 1.2 07/2018 93
www.horsch.com
Maintenance Schedule
After first operation Instructions Interval
Check All Hardware Tighten if necessary
During Operation Instructions Interval
Lubricate Machine
Track System, Conveyor swing arms, pivot arm, cylinders Daily
Fan - Direct Drive Check seals, function, speed setting Daily
Hydraulic Fan(s) Tighten drive flange for the first time after 50 hrs. Annually
Metering Units, Sealing Strips and Rape Brushes Check condition and check for wear Daily
Metering Units Check that the rollers are rotating smoothly and are aligned Daily
Pneumatic System and Tank Check for leaks Daily
Pneumatic System, Connectors, Venturi and Hoses Check for wear and blockages Daily
Hydraulic System and Components Check function and condition Daily
Lock Check conveyor locked in transportation position Daily
Hydraulic Control Valve and Hoses Check for leaks and function Daily
Tension Bushings Check Tension Bushing on machine where applicable Daily
After Season Instructions Interval
Electrical Control Devices (Drill Manager) Store in a dry place
Entire Machine Carry out cleaning and maintenance
Entire Machine Park the machine undercover if possible
After 3-5 years Instructions Interval
Hydraulic Hoses Replace hoses on lifting hydraulics
NOTE: If Tension Bushings are worn, replace immediately!