Upper link
Design with front packer
During use, the machine is guided in the front
via the front packer.
The machine and seed wagon must remain
movable toward each other in case of uneven
ground. The support must therefore be set to a
play of approx. 1.5 cm with the upper link:
Design with support wheels
The middle section is supported by the upper
link on the drawbar.
In working position the upper link must be ad-
justed in such a way that the machine is level
over the working width.
¾
Align the machine horizontally with the upper
link, e.g. if it is inclined toward the front on
light soil.
Lower the coulter discs for this purpose to
relieve the upper link.
Border plates
The border plates limit the ejection of soil over
the working width and prevent the formation of
earth dams.
¾
Adjust the height of the border plates to the
working depth, the working speed and in case
of wear:
48
49
Summary of Contents for Pronto 8 SW
