6
© 2005 directed electronics, inc.
valet/program switch
Ensure that the location you pick for the switch has
sufficient clearance to the rear. The switch should
be well hidden. It should be placed so passengers
or stored items (such as in a glove box or center
console) cannot accidentally hit it. The switch fits in
a 9/32" hole.
IIM
MPPO
ORRTTA
AN
NTT!! When the vehicle is delivered, please show the user where the switch
is located and how to disarm the system with it.
status LED
Things to remember when positioning the Status LED:
•
It should be visible from both sides and the
rear of the vehicle, if possible.
•
It needs at least 1/2" clearance to the rear.
•
It is easiest to use a small removable panel,
such as a switch blank or a dash bezel.
Remove it before drilling your 9/32" hole.
•
Use quick-disconnects near the LED wires if
the panel is removable. This allows mechan-
ics or other installers to remove the panel
without cutting the wires.
starter kill relay
If the Starter Kill Relay or it’s connections are immediately visible upon removal of the
underdash panel, they can easily be bypassed. Always make the relay and its con-
nections difficult to discern from the factory wiring! Exposed yellow butt connectors do
not look like factory parts, and will not fool anyone! For this reason, routing the starter
kill wires away from the steering column is recommended.
