1
O W N E R S M A N U A L
Standard Features
The following features are standard with your
RAS 200 Remote Start:
Two button remote control(s)*
Status Indicator (LED)
Valet/Service mode switch
Remote Start capabilities
Remote Heater/AC capabilities
Parking Light Verification
Safety Inputs (Brake & Hood)
Remote Shutdown Operation
Extended Range Receiver
Stop & Go
Auto Cold Start (Protected)
*
S models provided with single transmitter.
Optional Features
that you may
add to your RAS 200 (Consult with your
technician)
Remote Keyless Entry (Door
Lock/Unlock)
Trunk/Hatch Release
Window Roll-up
Note: Some features and options may
require additional parts and labor or may not
be appropriate for certain vehicles.
Automatic Transmission and Electronic Fuel
Injection is required on vehicles for Remote
Start products.
System Operation
Important:
Do not operate this remote
auto start in an enclosed garage or area
without proper ventilation. Be sure to famil-
iarize yourself with the features of the
Remote Auto Start Product prior to using the
product.
PROGRAM SWITCH:
The RAS is equipped with a program
switch.This program switch is usually
mounted in a convenient location under
or around the lower dash. If you can not
locate it, ask your installing dealer to
show you it’s location. If you desire to put
your Remote Auto Start in Service Mode;
this will allow you to use the optional
keyless entry features only, the vehicle
will not start with the remote control.
To enter the service mode:
1.Turn
ignition
to the
ON posi-
R A S 2 0 0
Button 1
LED
Button 2
• •
•
• •
•
Button 2
LED
Button 3
Button 1
2- Button
Transmitter
3- Button
Transmitter
+
ON
Press
+
Hold
