14
© 2005 directed electronics, inc.
H
H1
1//8
8 BBLLA
AC
CK
K ((--)) cchhaassssiiss ggrroouunndd ccoonnnneeccttiioonn:: Connect this wire to bare metal,
preferably with a factory bolt rather than your own screw. Screws tend to either
strip or loosen with time. All components, should be grounded to the same point
in the vehicle if possible.
H
H1
1//9
9 Y
YEELLLLO
OW
W ((+
+)) iiggnniittiioonn iinnppuutt:: Connect this wire to the (+)12V ignition wire. This
wire must show (+)12V with the key in Run position and during cranking. Take care
to insure that this wire cannot be shorted to the vehicle chassis at any point.
