© 2005 directed electronics, inc.
11
main harness wiring guide
H
H1
1//1
1 O
ORRA
AN
NG
GEE ((--)) 5
50
00
0 m
mA
A ggrroouunndd--w
whheenn--aarrm
meedd oouuttppuutt:: This wire supplies a (-)
ground as long as the system is armed. This output ceases as soon as the system is
disarmed. This wire controls operation of the pre-wired starter kill relay and can be
used to control other optional accessories.
N
NO
OTTEE:: If connecting the orange wire to control another module, such as a 529T or
530T window controller, a 1 amp diode (type 1N4004) will be required. Insert the
diode as shown below.
IIM
MPPO
ORRTTA
AN
NTT!! Never interrupt any wire other than the starter wire.
H
H1
1//2
2 W
WH
HIITTEE lliigghhtt ffllaasshh oouuttppuutt:: As shipped, this wire should be connected to the (+)
parking light wire. It will supply a (+) 10A output. If the light flash polarity fuse jumper
inside the unit is moved to the opposite position (see Internal Jumpers), this wire sup-
plies a (-) 10A output. This is suitable for driving (-)parking light wires.
N
NO
OTTEE:: A dual diode harness assembly is provided (Viper model only) for European
vehicles which have parking light capability for illumination of only the parking lights
on the side of the vehicle to the road when parked.
