Horizont 210221-0903, Operating Instructions Manual

Page: 9 / 19

16 17
LCD remote control
With cable / radio connection:
part no. 21157-08-0002
Main screen
Press Arrow left
Cross
Work light
Press ON/OFF
Flash control
Battery remote control
Connection established
radio / cable (in this example
cable operation)
Press Arrow right
Press Lift Board
Press Lower Board
Light arrow
Rotating arrow
Error indication
(Text describing the error!)
Observe acoustic and optical error signals when switching on.
Battery level indication
Arrow in middle/neutral position
Defective lights are displayed on the remote control 1:1.
The working lamp is switched on by key S3 (optionally the working lamp can also be switched on by key S1).
A cable set with the part number 820472-1 is required for the remote control !
For the feed-through in the control housing, the hole must be drilled to the size of aPG11 cable gland and fitted
with a PG11 cable gland.
Accessory available on request (Radio remote control)
LED Remote control
The light arrow can also be operated with other remote controls from the FA1 programme.
These are available in different versions:
LED remote control with cable: Artikel 21153-0003
LED remote control cable /radio: Artikel 21154-0003
FLASH CONTROL
RIGHT
BATTERY
LEVEL
ROTATING ARROW
LEFT
Press
ARROW LEFT
CROSS
FLASH CONTROL
LEFT
Press
ARROW CENTER
ROTATING ARROW CENTER
ROTATING ARROW RIGHT
Press
ON / OFF
Press
ARROW RIGHT
Press
LIFT Board
LIFT
Board
LOWER
Board
Press
LOWER Board
ERROR DISPLAY
WORK
LIGHT
INDICATOR
Defective lights are displayed on the remote control 1:1.
The working lamp is switched on by key S3 (optionally the working lamp can also be switched on by key S1).).
A cable set with part number 820472-1 is required for the remote control!
For the feed-through in the control housing, the hole must be drilled to the size of a
PG11 cable gland and fitted with a PG11 cable gland