Horizont 210221-0903, Operating Instructions Manual

Page: 5 / 19

8 9
Short product description
The light arrow is suitable for stationary and mobile use on motorways, expressways, federal and rural roads
as well as in inner-city areas. The locally applicable regulations must be observed:
in Germany RSA, TL warning lights, StVO.
The light arrow is equipped with LED lamps. It is available in three versions depending on the construction: with
electric lifting, manual lifting or fixed mounting.
Operation is done via an external remote control. The device can be used universally in 12Volt or 24V on-board
networks. LED lamp monitoring, night reduction of the lamps and deep discharge protection are integrated.
The lamp monitoring indicates a failure in the signal image, depending on the fault, by the yellow or red LED
lighting up in the remote control.
The dimming reduces the luminosity of the LED lamps depending on the ambient luminosity (to protect mo-
torists from dazzling).
The deep discharge protection switches the device off once the battery is discharged (battery protection).
The main control is located in the control box. All electrical connections are spring connected to the main
control, with the exception of the lifting actuator and power supply.
The circuit board can be removed after loosening the fixing screws, removing the spring connectors, loosening
the motor cables and supply cable.
Technical Data
Nominal operating voltage ..........................................................................................12/24 V
Max. operating volltage ..............................................................................................30 VDC
Min. operating voltage ................................................................................................10 VDC
Max. actuator current .................................................................................................10A
(temporarily at lifting / lowering actuator)
Light ducts .................................................................................................................16
Outputs for additional lamps .......................................................................................2 (max. à 6 A)
Automatic switch – off light arrow (deep discharge protection) ................................... at 10 V
Provide fuses on the vehicle........................................................................................ min. 25 A
- automatic voltage adjustment of the actuators
- Night-time reduction of the LED lamps
- Reverse polarity protection
Radio remote control
Transmitting frequency ............................................................................................... 2,4 - 2,48 GHz
Transmission performance .......................................................................................... 10 mW
Operating hours of the system with 1 x 180 Ah / 12 V battery (approx. with completely charged battery)
Signals LEFT showing / RIGHT showing / CROSS Day Night
with mit LED – lamps 100 h 250 h
Operation
The entire operation is carried out by means of the remote control.
- Switch on the remote control
- If existing, release the locking lever of the board‘s lifting mechanism.
( This is only necessary in case of manual locking and electromotive uprighting )
- Select the desired function on the remote control.
-
Green flashing
, respectively
green static light
of the control LEDs indicates correct functioning of the
chosen feature on the remote control.
The LEFT ARROW, RIGHT ARROW and CROSS functions can only be activated when the board is fully upright.
On the remote control, the
PANEL UP
indicator must light up (except for fixed installation).
When the panel is only partially upright, only the auxiliary lamps, if fitted, are active.
Alternatively, the panel can be raised using the LEFT ARROW, RIGHT ARROW and CROSS keys. When the posi-
tion is reached, the selected light pattern is activated.
Remote control
www.horizont.com
The LEDs on the remote control are dimmed depending on the ambient light conditions. At a certain ambient
brightness the buttons (outline and symbols) are additionally illuminated.
ARROW LEFT (5)
CROSS (6)
ADDIONTAL MS340 LAMPS
(7)
SPECIAL
FEATURES
ARROW RIGHT (4)
PANEL UP (3)
PANEL DOWN (2)
ON / OFF (1)