Horizont 210221-0903, Operating Instructions Manual

Page: 6 / 19

10 11
BATTERY CONDITION INDICATION
green > 12,1 V ( > 45% )
yellow 12,1 V> Ubatt < 11,8V ( 20% - 45% )
red < 11,8 V ( 20% )
ERROR DISPLAY
red error indication
ACOUSTIC ERROR INDICATION
At mobile warning trailers, malfunctions will also be indicated by an acoustic signal.
WIRELESS (RADIO) REMOTE CONTROL
The radio remote control contains a high quality Ni-Mh battery.
As soon as the cable is connected, it is automatically charged via the internal charge controller.
The charging time of the empty battery is about two hours. During operation, the status of the
internal battery is displayed in intervals of approx. 10 seconds in the battery condition display.
This is indicated by flashing of the LED.
Flashing green: Remaining capacity <40 %
Flashing yellow: <20 %
Flashing red: <10 %
In addition, an acoustic warning signal is emitted by the remote control when reaching its low battery capacity.
Operating time with fully charged battery approx. 10 hours (continuous operation).
In radio mode, the remote control switches off after approx. 5 minutes.
In cable mode the remote control does not switch off
.
When the cable is plugged in, there is no radio communication with the control unit !
CHARGING INDICATOR (RADIO) / OPERATING STATUS INDICATOR (CABLE)
When the charging cable or data cable is plugged into the remote control during radio operation (with the
remote control and main control switched off!), the LED at the ON/OFF button lights up yellow for approx. 30
minutes. This indicates that the remote control is supplied with power and the charging device is working.
Charging continues automatically even if the yellow LED turns off.
The charging indicator can be reactivated by pressing the ON/OFF button very briefly.
This is for information purposes only!
To switch on the control unit or the remote control in this state, press and hold the
ON/OFF key pressed (see description below).
If no connection can be established, the remote control switches off automatically after a few
seconds in radio operation and after approx. 5 minutes in cable operation.
The internal charging device allows charging between a temperature of +5 C° and +60 C.
This is a technical necessity in order to ensure the long service life and operational safety of the
internal battery. However, the yellow charging indicator continues to light up yellow beyond the
temperature range as described.
CAUTION!
The socket on the remote control must be closed with the supplied protective cap when the cable
is not plugged in.
Otherwise there is a risk of water penetrating the housing and damaging the electronics.
The bayonet lock must always be closed, even when the plug with cable is plugged in.
Features
SWITCH ON Press key for approx. 1 seconds .
LED indication
( 1 ):
green connection with main control was established successfully
red connection with the main control could not be established -
no communication or control system has switched off due to under voltage
SWITCH OFF press key for approx. 4 seconds until the LEDs of key 4 (arrow right ) and
key 5 (arrow left) light up in red colour. Release key
Working with the radio version, the arrow itself is also switched off provided a radio connection
is established. A working radio connection is indicated by the red LEDs (4) and (5). If there is no
radio connection, the LEDs light up yellow.