Horizon Fitness Perfect Binder BQ-260, Manual

Page: 93 / 94

87
10. Installation of Friction Cover Feeder CF-220
To confirm proper set up of cover feed unit
and nipping unit, cover test feeding must be
performed.
1.
Confirm nipper unit is at lower position.
NOTE
Nipper unit is at lower position when five
screws on nipper unit appear.
2.
Depress cover single feed button to feed
a cover to nipper unit.
3.
Confirm that cover is fed until it touches
cover stopper and feed rollers or two
support rollers slightly touch cover edge.
NOTE
- When support rollers/transport rollers and
cover make noise or support rollers /transport
rollers push cover obviously, slide back cover
feed unit.
- When only one support roller touches, cover
or transport roller is angled against cover,
adjust angle of cover feeder with cover feeder
angle adjust knob.
4.
Repeat above step 2 and 3 until cover
can be fed smoothly.
10-2 Set Up
10-2-4 Test Feed of Cover
5 Screws
Cover Single Feed Button
Angle Adjust Knob
Cover Feeder
Nipper Unit
Cover
Stock