Horizon Fitness Perfect Binder BQ-260, Manual

Page: 39 / 94

33
4. Set Up BQ-260
Test binding is necessary to confirm each
unit is set up properly.
1.
Prepare stock for test binding.
NOTE
Stock for test binding must be same stock as
your job.
2.
Confirm that cover is fed on nipping unit
and LED for cover on monitor is off.
NOTE
When cover is not fed properly on nipping
unit and LED for cover on monitor is on, set
up cover so that cover edge touches to stop-
per.
3.
True up stock and insert stock into
clamper. Left side of stock must touch
register shaft in clamper.
NOTE
Left side of stock must be register side. Spine
of stock must face down.
4-7 Test Binding
4-7-1 Test Binding for With Milling Binding
LED for Cover
Cover Single Feed Button
Clamper