Horizon Fitness Perfect Binder BQ-260, Manual

Page: 22 / 94

16
3. Before Starting Operation
This section shows how to check safety device
function. Check all safety device function
before starting operation on BQ-260.
3-1 Safety Device Function Check
Stop Button
Nipping Mode Select Switch
Milling Mode
Select Switch
Pad Binding
Lamp
Start Button
1.
Pull up stop button. LED on monitor for
stop button turns off.
2.
Set nipping mode select switch to center
position to select pad binding mode.
- Pad binding lamp on control panel turns
on to indicate that pad binding is selected.
3.
Select without milling mode with milling
mode select switch.
- Confirm lamp on start button is ON.
NOTE
Depress level plate control button when start
lamp is not on.
Near Side
WARNING
Do not touch clamper while clamper is
moving. Moving clamper can cause
severe personal injury.
LED for Stop But-
ton
Center
3-1-2 Safety Cover