57
When doing coordinate measurement coordinates of occupied point, the instrument
height, the prism height and back sight azimuth should be set.
Operation procedure
Operation
Display
Set the direction angle of
known
point A *1 )
Set
direction
angle
Collimate target prism B, and
press
key
Collimate
target
prism
*1Refer to Section 4.3 “Setting of Horizontal Angle”.
In case the coordinate of instrument point is not entered, (0,0,0) will be used as the
default for the instrument point. The prism height will be calculated as 0 when the
prism height is not set.