171
Press the F1（MEAS）key.
The fine mode measuring
starts.
F1
⑦ When the display value
dHR, Dhd and DZ
are equal to 0 the layout point
is established *3
Press the F3 (NEZ) key.
The measured coordinate data
is shown to confirm the value
of the layout point.
F3
Press the F4 (NEXT) key to
set next layout point.
F4
*1）Refer to Section 1.10 “How to Enter Alphanumeric characters”
*2）A point number can not be entered when data to comply with the coordinate
value does not exist in the file.
*3）Pressing the
or ANG keys can switch between the layout angle and
distance.