Horizon Fitness HTS-580 Series Operation Manual Download Page 225

Page: 225 / 247

225

11.5 Other Settings

The instrument can be set to auto matically power off, change the battery type, reset

configuations and select the operating language.

Operation procedure

Operation

Display

Press F1 (OTHERS SET) from

the CONFIG menu 2/2.

11.5.1 Auto Power Off

If there is no key operation or ongoing measurement in 60 minutes the instrument

will power off automatically.

Operation procedure

Operation

Display

Press the F1 key from the OTHERS

SET menu to get to AUTO POWER

OFF.

Press the F2 (OFF) key to not select

this feature or F1 to engage, press

the ENT key and the instrument will

return to the OTHER SET menu.

Summary of Contents for HTS-580 Series
























































































































































































































































Search results

Summary of Contents for HTS-580 Series

Reviews:

Horizon Fitness HTS-580 Series, Operation Manual, Page: 225 / 247

Search results

Summary of Contents for HTS-580 Series

Reviews: