101
7.6.6 Editing vertical alignment data
The following procedures are used to edit the data.
Operation procedure
Operation
Display
Press
F4
(edit
vertical
alignment data) in the menu of
road design, the last entered
point will be shown.
F4
Press [▲] or [
▼
] to select the
alignment data to be modified.
Press F1 (edit) to edit, and
press ENT (ENTER). *1
[▲]or[
▼
]
F1
Enter data
ENT
The modified alignment data
will be displayed. Continue to
select data to modify by using
the [▲] or [
▼
] keys. ESC to
end.
*1Or press F4 (search), then input the stake number of the alignment data
(chainage) which is required to be modified.