BEFORE
YOU
BEGIN
INTRODUCTION
IMPORT
ANT
PRECAUTIONS
ASSEMBL
Y
BEFORE
YOU
BEGIN
ELLIPTICAL
OPERA
TION
LIMITED
W
ARRANTY
TROUBLESHOOTING
&
MAINTENANCE
CONDITIONING
GUIDELINES
BEFORE YOU
BEGIN
ASSEMBL
Y
INTRODUCTION
IMPORT
ANT
PRECAUTIONS
ELLIPTICAL OPERA
TION
CONDITIONING GUIDELINES
TROUBLESHOOTING &
MAINTENANCE
LIMITED WARRANTY
TOP CAP
CONSOLE MAST BOOT
CONSOLE MAST
MAIN FRAME
CONSOLE WIRE
FLAT WASHER (C)
SPRING WASHER (B)
BOLT (A)
ARC WASHER (D)
ASSEMBLY
STEP 1
A) Open
HARDWARE BAG FOR STEP 1.
B) Slide the
CONSOLE MAST BOOT
followed by the
TOP CAP
over the
CONSOLE MAST
.
C) Carefully pull the
CONSOLE WIRES
through the
CONSOLE MAST
using the twist tie located inside the
CONSOLE MAST
.
D) Attach the sides of the
CONSOLE MAST
to the
MAIN FRAME
using 4
BOLTS (A),
4
SPRING WASHERS (B)
and 4
FLAT WASHERS (C).
E) Attach the front of the
CONSOLE MAST
to the
MAIN FRAME
using 2
BOLTS (A),
2
SPRING WASHERS (B)
and 2
ARC WASHERS (D).
F) Slide
CONSOLE MAST BOOT
down to seal the console mast hole.
BOLT (A)
15 mm
Qty: 6
SPRING WASHER (B)
Qty: 6
FLAT WASHER (C)
20 mm
Qty: 4
ARC WASHER (D)
17 mm
Qty: 2
HARDWARE BAG FOR STEP 1 CONTENTS :
TOOLS INCLUDED
PARTS INCLUDED
c
5mm L Wrench
c
5mm T Wrench
c
Phillips Screw Driver
c
13/17mm Flat Wrench
c
1 Console
c
1 Console Mast
c
2 Upper Handlebars
c
2 Lower Handlebars
c
2 Lower Link Arms
c
2 Pivoting Foot Pads
c
2 Elbow Covers Sets
c
2 Handlebar Cover Sets
c
2 Mid-Stabilizer Feet
c
2 Guiderail Caps
c
1 Console Mast Boot
c
1 Top Cap
c
2 Pedal Arms
c
2 Pedal Arm Covers
c
2 Roller Wheel Covers
c
6 Hardware Bags
c
1 Power Supply
c
1 Audio Adaptor Cable
SPEAKERS
CONSOLE
UPPER HANDLEBAR
LOWER HANDLEBAR
LOWER LINK ARM
FRONT STABILIZER TUBE
FAN
GRIP PULSE
CONSOLE MAST
TOP CAP
PIVOTING FOOT PAD
PEDAL ARM
GUIDERAIL CAPS
HANDLEBAR COVER SET
CONSOLE MAST BOOT
ELBOW COVER SET
CUSTOMSTRIDE
™
ADJUSTMENT KNOB
If you have questions or if there are any missing parts, contact Customer Tech Support.
If any warning decals become worn, damaged, or missing, they should be replaced.
Contact information is located on the back panel of this manual.
MID-STABILIZER FOOT
ROLLER WHEEL COVER
PEDAL ARM COVER
For a complete exploded diagram, visit us at www.horizonfitness.com
TOP CAP
CONSOLE MAST BOOT
CONSOLE MAST
MAIN FRAME
CONSOLE WIRE
FLAT WASHER (C)
SPRING WASHER (B)
BOLT (A)
ARC WASHER (D)
H-series_E5_Rev.1.2.indd 6-7
6/16/08 2:40:06 PM