horiba LAQUA-PC1100, Instruction Manual

Page: 50 / 117

Conductivity measurement
34
■
Conductivity measurement
The conductivity cell can be used to measure the conductivity, salinity, TDS, and
resistivity of a sample. Salinity, TDS, and resistivity are calculated from the measured
conductivity value.
Press the
key to select the measurement parameter (refer to “ Changing the
measurement parameter ” (page 10)).
Conductivity can be measured using CH2 of the instrument. Press the
keys to set
the CH2 to the active state.
The basic steps are the same for all measurement parameters, however, some settings
and operations are only valid for specific measurement parameters. Select the settings
and perform the steps that show the mark of the parameter you want to measure.
< Examples >
: Conductivity measurement
: Salinity measurement
: Total dissolved solids measurement
: Resistivity measurement
: All measurement parameters