horiba LAQUA-PC1100, Instruction Manual

Page: 26 / 117

Basic operation
10
●
Switching the active channel
Press the keys to switch the active channel between CH1 and CH2.
When CH1 is active, "ACT" icon is displayed on the upper part of the screen.
When CH2 is active, "ACT" icon is displayed on the lower part of the screen.
●
Changing the measurement parameter
This instrument measures multiple parameters. For measurement, an electrode
corresponding to the measurement parameter is required. In the measurement mode,
the measurement parameter can be changed by pressing the
key.
This operation is available for the active channel that "ACT" is shown.
Press the
keys to select the channel to be active.
< Channel 1 >
< Channel 2 >
key
key
key
key
key key