horiba 5002S-10C, Instruction Manual

Page: 35 / 79

23
Electrode Preparation
Calibration
Measurement
After Measurement
11
Rinse the electrode with pure water.
Make sure that the membrane part has been
well rinsed with pure water.
12
Wipe off the moisture.
Wipe off the moisture using soft and clean lint-free paper or cloth.
13
Soak the electrode in the second
solution for calibration prepared in
step 4.
Soak the membrane cap fully into the solution
for calibration.
Do not touch the stir bar with the electrode. It may damage
the electrode.
It is recommended to place the electrode in the electrode stand.
Note Note
Tip Tip