Other settings
75
■
Other settings
●
Printing measured values and calibration data
Print out the measured value or calibrated value displayed on the instrument, or the
measurement data or the calibration data saved in the instrument. If the repeatability is
inspected, the inspection data is printed out with the calibration data.
Pressing the
key starts printing during displaying the data you want to print. Use the
printer cable to connect the printer unit with the instrument beforehand. If the automatic
data memory is set to "ON", you cannot print out in the measurement mode.
Measurement data is printed out both channel 1 and channel 2.
Reference
For details of how to display measurement data and calibration data, refer to the respective
section.
"Displaying saved data" (page 52)
"Displaying the latest calibration and inspection data" (page 58)
Refer to the following table for the pH (two point calibration) and ion concentration (two
point calibration) in the case of LAQUAact-PH130.
